top of page


Public·96 members
Jacob Cook
Jacob Cook

My Four Walls Mac Serial Terminal [WORK]

A Terminal Server, also known as Serial Server, connects devices with a USB, RS232, RS422, or RS485 serial interface to a local area network for transmission of serial data over Ethernet to network server applications. The most common application for Terminal Servers is out-of-band management of routers, switches, and firewalls as an efficient way to recover equipment when the network is down. It serves as a single hardware solution for a secure alternate route to monitor IT, networking, security, and power devices from multiple vendors. Terminal Servers have physical wired or wireless (LTE or WiFi) network connection on one side, and one or more serial ports on the other side. While some Serial Terminal Servers can be very simple devices, it is best practice to use a Terminal Server with advanced security functionality, data encryption, and user authentication to ensure network data transmissions, and access to network equipment, is protected.

My Four Walls Mac Serial Terminal

A Perle IOLAN Terminal Server is perfect for Engineers and Project Managers that require a high performance, IPv6 compatible, Serial to Ethernet solution. They have all of the advanced security functionality needed to perform secure remote data center management and out-of-band management of IT assets from anywhere in the world. In addition, with innovative TrueSerial Technology, Perle IOLAN Terminal Servers are the only products to guarantee authentic serial communications and maintain device protocol integrity across Ethernet. This makes them ideal for networking async devices such as POS terminals, PBX's, card readers, and a wide variety of industrial equipment to TCP/IP Ethernet.

This 4 Port USB to RS232 Serial Hub lets you connect up to four RS232 serial devices to your Mac or PC laptop or desktop computer through a single USB port, as though the computer offered built-on DB9M serial connectors.

To authorize the server, you must connect your laptop to the server with a USB cable, then use a command-based serial protocol to test the connection and authorize the server. In addition to IAM credentials, you need a USB cable, a laptop, and serial terminal software, such as PuTTY or screen, to complete these steps.

Connect the USB cable to your laptop first and then to the server. The server includes a USB chip that creates a virtual serial port available to you on the laptop. You can use this virtual serial port to connect to the server with serial terminal emulation software. You can only use this virtual serial port to run Outpost Configuration Tool commands.

This section contains instructions for using popular serial terminal programs, but you are not required to use these programs. Use the serial terminal program you prefer with a connection speed of 115200 baud.

PuTTY (/ˈpʌti/)[4] is a free and open-source terminal emulator, serial console and network file transfer application. It supports several network protocols, including SCP, SSH, Telnet, rlogin, and raw socket connection. It can also connect to a serial port. The name "PuTTY" has no official meaning.[5]


Welcome to the group! You can connect with other members, ge...


  • Elvin Ziphzer Ybias
    Elvin Ziphzer Ybias
  • delfin jr armcin
    delfin jr armcin
  • Janet Gee
    Janet Gee
  • Aiden Williams
    Aiden Williams
Group Page: Groups_SingleGroup
bottom of page